zero-0373-GameMax Black Hole ARGB Gaming Case w/ Glass Window
PRODUCT CODE: CAA-GMXBLACKHO
MANUFACTURER: GAMEMAX
CATEGORY: Cases
£ 42.064 Last stock amount = 28
Black Hole ARGB Mid Tower Gaming Case The GameMax Black Hole Mid-Tower gaming case includes two 200mm ARGB Ring Fans that cover the full width of the front panel, the Black hole is designed to make building easier, this case is finished with premium aesthetics for those gamers wanting to go to the next level without breaking the bank.
- Design – The Black Hole is a brilliantly designed Mid-Tower PC gaming case and the first GameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow. Fit an ATX motherboard and with plenty of room you can fit a wide selection of top hardware, meeting most installation requirements.
- Motherboard Sync – You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like.
- Excellent Airflow – Excellent cooling options are on offer with two 200mm fans at the front are not only more efficient but a lot quiter compared to mounting 120mm fans, mount a total of eight fans and room to mount water cooling radiators on the front (Up to 360mm), top (Up to 280mm) and rear (Up to 120mm) your case will have no problem cooling those high end components.
- ARGB Hub – Included in the Black Hole is an ARGB V2.0 ARGB PWM hub, connect up to five fans and two ARGB Strips, have access to 18 colour modes manually or have even more using the motherboard software. Once all connected enjoy PWM auto speed controlled via MB’s PWM signal, also 2 RGB buttons (Mode & Brightness), it much better for user to easy adjust light mode and adjust between 5 different brightness modes (0-20-40-80-100%).
- Tempered Glass – A 3mm full left side tempered glass panel to show off your build from all angles.
- Easy Maintenance – Located on the top of the Black Hole is a dust filters, helps to prevent dust from getting into your build and helps improve the performance of your chassis.
- GPU Bracket – The chassis includes a bracket designed for support to the graphics card, prevents sag and the bracket allows for the installation of larger graphic cards.
Vist our online store for availability and uptodate pricing
Zero42 ONLINE SHOP
Black Hole ARGB Mid Tower Gaming Case
- Design – The Black Hole is a brilliantly designed Mid-Tower PC gaming case and the first GameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow. Fit an ATX motherboard and with plenty of room you can fit a wide selection of top hardware, meeting most installation requirements.
- Motherboard Sync – You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like.
- Excellent Airflow – Excellent cooling options are on offer with two 200mm fans at the front are not only more efficient but a lot quiter compared to mounting 120mm fans, mount a total of eight fans and room to mount water cooling radiators on the front (Up to 360mm), top (Up to 280mm) and rear (Up to 120mm) your case will have no problem cooling those high end components.
- ARGB Hub – Included in the Black Hole is an ARGB V2.0 ARGB PWM hub, connect up to five fans and two ARGB Strips, have access to 18 colour modes manually or have even more using the motherboard software. Once all connected enjoy PWM auto speed controlled via MB’s PWM signal, also 2 RGB buttons (Mode & Brightness), it much better for user to easy adjust light mode and adjust between 5 different brightness modes (0-20-40-80-100%).
- Tempered Glass – A 3mm full left side tempered glass panel to show off your build from all angles.
- Easy Maintenance – Located on the top of the Black Hole is a dust filters, helps to prevent dust from getting into your build and helps improve the performance of your chassis.
- GPU Bracket – The chassis includes a bracket designed for support to the graphics card, prevents sag and the bracket allows for the installation of larger graphic cards.
Introducing the GAMEMAX Black Hole ARGB Gaming Case Are you looking for a gaming case that provides an unparalleled gaming experience? Look no further than the GAMEMAX Black Hole ARGB Gaming Case. Offering both sleek, modern looks and innovative features, this case is sure to exceed all of your expectations. The Black Hole ARGB Gaming Case is designed to make your gaming setup stand out. The striking black case comes with a glass window, allowing you to show off the inside of your computer. It also includes two large 20 cm ARGB ring fans on the front, as well as a fan controller with LED and brightness buttons. The case is designed to provide plenty of space for all your components. It can accommodate ATX motherboards as well as two 3.5” internal drive bays and three 2.5’ internal drive bays. It also provides seven full-size expansion slots. In terms of cooling your components, the Black Hole ARGB Gaming Case has you covered. It comes with two large 200 mm dual-ring ARGB fans on the front and a 120 mm Mirage ARGB fan at the rear. It also has fan mounts for up to 360 mm radiators on the front and top. In addition, the Black Hole ARGB Gaming Case has a variety of connectors and controls, including a USB 3.0, USB 2.0, HD Audio, microphone and RGB buttons. It also comes with a one-year warranty. So, if you’re looking for a gaming case that offers unparalleled performance, modern looks and innovative features, the GAMEMAX Black Hole ARGB Gaming Case is the perfect choice. With its sleek design, ample space for components and impressive cooling system, this case is sure to exceed all of your gaming needs.
Description
Specification
- Form Factor: ATX
- #Hide#Small Form Factor: No
- Power Supply Wattage: No PSU
- Motherboard Support: "ATX, Micro ATX, Mini ITX"
- #Hide#Window(s): Yes (Window)
- #Hide#LED Lighting: Yes (LED Lighting)
- Connectors / Controls: 1 x USB 3.0
1 x USB 2.0
1 x HD Audio
1 x Microphone
2 x RGB buttons (Mode & Brightness) - Drive Bays: 2 x 3.5†Internal
3 x 2.5†Internal
NOTE: 1 x 2.5"" & 2 x 3.5"" shared - Expansion Slots: 7 x Full Size Expansion Slots
- Cooling System: Included:
Front: 2 x 200mm Dual-Ring ARGB Fans
Rear: 1 x 120mm Mirage ARGB Fan
Fan Mounts
Front: 3 x 120 / 2 x 140 mm
Top: 2 x 120 / 2 x 140 mm
Rear: 1 x 120 mm
Bottom: 2 x 120 mm - .:
Radiator Support:
Front: Up to 360 mm
Top: Up to 360 mm - Colour: Black
- Material: Body: SPCC 0.5mm
Front Bezel: ABS & Tempered Glass
Side Panel: Tempered Glass - Compatability: GPU max length:
355 mm
CPU cooler max height:
165 mm
PSU max length:
170 mm - Weight/Dimensions: 5.9 kg
(WxHxD) 215x 466 x 414 mm - Additional Features: See Overview
- Accessories: Manual
V2.0 Controller Manual
Accessories Pack - Package Weight: 7.2000 kg
- Warranty: 1 Year
Need some help with your I.T just call the experts
* Advice is always free
0800 640 6042
Our customers love us, and you will too. Highest quality products , competitive pricing and great service. What more could you possibly want?